2.11 [5] Optional Device
582
PC Programming Manual
Default
600 ms
Value Range
100 + 10 × n (n=1–390) ms
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
2.7.1 [1-1] Slot
2.7.25 [1-1] Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
None
DISA Cyclic Tone Option—Tone Off Maximum Time
Specifies the maximum time that the PBX waits for a cyclic tone to be sent from the telephone
company before recognizing it as a tone-off. When no tone is detected within the time set here, the
PBX recognizes it as a tone-off.
Note that this option can only be set when
DISA Cyclic Tone Detection
on this screen is set to
"Option".
To apply changes to this setting, follow the steps below:
1.
Change this setting
2.
Set the status of the MSG card (KX-TDA50) or OPB3 card (KX-TDA100/KX-TDA200/KX-
TDA600) card to "
OUS
", then "
INS
".
Default
600 ms
Value Range
100 + 10 × n (n=1–390) ms
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
2.7.1 [1-1] Slot
2.7.25 [1-1] Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
None
DISA Cyclic Tone Option—Repeating Times of On/Off for Detection
Specifies the number of times the tone pattern (a set of tone-on and tone-off) must be received to
establish reception of the cyclic tone. This determines the end of call.
