manualshive.com logo in svg

Panasonic KX-TDA50, Feature Manual

Share
Download
Panasonic KX-TDA50 Feature Manual Download Page 80

No

No

No

Yes

Yes

The message for 
busy is sent to the 
caller.

F

The call is routed to 
the intercept destination.
(Intercept Routing   Busy)

G

The call is disconnected.

A

Yes

Does the caller 

press     while hearing a busy 

tone (Call Retry)?

(Busy Tone / 
DND Tone 
Continuation 
time 

expires

)

Is an Intercept 

Routing   Busy destination

assigned?

Is a DISA Busy

Message assigned?

Busy tone 

OGM

Intercept Routing

Busy tone

What method is assigned 
for DISA Intercept          
Routing   DND?   

The call is disconnected.

No

A

The call is routed to 
the intercept destination.
(Intercept Routing   DND)

Yes

G

Does the caller 

press     while hearing a busy 

tone (Call Retry)?

The message for 
the DND mode is 
sent to the caller.

F

(Busy Tone / 
DND Tone 
Continuation 
time 

expires

)

Continued from previous page

Continued from previous page

DISA Intercept Routing—No Dial

If the caller fails to dial any digits within a preprogrammed time period (DISA 1st Dial Time for Intercept) after
hearing the outgoing message (OGM), one of the following can be selected through system programming:

a.

Disable:

 The call will be terminated.

b.

Operator:

 The call will be redirected to the operator.

c.

AA-0, AA-9:

 The call will be redirected to the destination assigned to that AA number.

®

 4.4  [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—

DISA—No Dial Intercept Timer

®

 [211] DISA Intercept Time

®

 7.3  [5-3-1] Voice Message—DISA System—Option 1—

DISA Intercept—Intercept when No Dial after

DISA answers

DISA Built-in Automated Attendant Number (DISA AA Service)

After listening to the outgoing message (OGM), the caller may dial a single digit (DISA AA number). The
destination for each DISA AA number can be assigned for each message. It is also possible to assign other
DISA floating extension numbers as the destination (

Multistep DISA AA Service

).

If the caller dials a second digit within a preprogrammed time period (DISA 2nd Dial Time for AA), the DISA
AA service is not employed.

®

 7.4  [5-3-2] Voice Message—DISA Message—

1 Digit AA Destination (Extension Number)—Dial 0–9

®

 4.4  [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—

DISA—2nd Dial Timer for AA

80

Feature Manual

Document Version  2010-11  

4.1.7 DISA (Direct Inward System Access)

Summary of Contents for KX-TDA50

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands