Panasonic KX-TDA50, Feature Manual

Page: 167 / 384

When the original destination is: The Available Intercept Destination is:
•
PS Ring Group
*2
•
External Pager (TAFAS)
*2
•
Analog/ISDN Remote Maintenance
•
Other PBX Extension (TIE with no PBX Code)
Not assignable (Intercept Routing is not available.)
*1 Intercept Routing for DISA will redirect a call only if all of the Direct Inward System Access (DISA) ports are busy. If Intercept Routing
is activated after a call from DISA reaches the destination extension, the Intercept Routing settings assigned to that extension will
be applied.
*2 By assigning the forward destination of a Virtual PS to a PS Ring Group or external pager, and assigning Intercept Routing destinations
to the Virtual PS, calls to these destinations will be redirected to the Intercept Routing destination of the Virtual PS.
FWD Destination
<Forward Destination of Virtual PS>
Ext. No. of the Virtual PS
2001
600
... ...
"600" is an example of a
Floating Extension No.
for the External Pager
Intercept Destination
<Intercept Destination of Virtual PS>
...
...
...
2001 1001 1001 1001 1001
Day Lunch Break Night
... ... ... ... ...
Ext. No. of the Virtual PS
When extension 2001 is called from another extension or is the first destination
of an incoming CO line call, etc., the call will ring at extension 600 (external pager)
first, and then ring at the intercept destination (extension 1001) after the IRNA
Timer expires.
Programming Example
[Available Intercept Destination]
Intercept Destination Availability
Wired Extension (PT/SLT/T1-OPX) ü
PS ü
ICD Group ü
PS Ring Group ü
Floating Extension no. for SVM ü
VM Group (DTMF/DPT) ü
External Pager (TAFAS) ü
DISA ü
Analog/ISDN Remote Maintenance ü
Idle Line Access no. + Phone no.
ü
Document Version 2010-11 Feature Manual 167
9.1.11 Intercept Routing