manualshive.com logo in svg

Panasonic KX-TDA50, Feature Manual

Share
Download
Panasonic KX-TDA50 Feature Manual Download Page 109

6.1.3  Flexible Buttons

Description

You can customize the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key
Modules, and PSs through either system or personal programming. They can then be used to make or receive
intercom or CO line calls or be used as feature buttons, as follows:

[Button Usage]

Button

Usage

Single-CO (S-CO)

Used to access a specified CO line for making or receiving calls.
(

®

 3.1.14  CO Line Access)

Group-CO (G-CO

)

Used to access an idle CO line in a specified trunk group for making
calls. Incoming calls from CO lines in the assigned trunk group arrive
at this button. (

®

 3.1.14  CO Line Access)

Loop-CO (L-CO)

Used to access an idle CO line for making calls. Incoming calls from
any CO line arrive at this button. (

®

 3.1.14  CO Line Access)

Direct Station Selection (DSS)

Used to call an extension with a one-touch operation. (

®

9.1.13  Intercom Call)

Network Direct Station Selection
(NDSS)

Used to access an extension at another PBX within the same
network. (

®

 13.1.15  Private Network Features—NDSS (Network

Direct Station Selection))

One-touch Dialing

Used to call a preprogrammed party or access a feature with a
one-touch operation. (

®

 12.1.4  One-touch Dialing)

Incoming Call Distribution (ICD)
Group

Used to access a specified incoming call distribution (ICD) group for
making or receiving calls. (

®

 9.1.1  ICD GROUP FEATURES)

Message

Used to leave a Message Waiting indication or call back the party
who left the Message Waiting indication. (

®

 11.1.3  Message

Waiting)

FWD/DND (External/Internal/
Both)

*1

Used to set the FWD or DND feature for the extension. The feature
is applied to CO line calls, intercom calls, or both. (

®

 6.1.7  FWD/

DND Button, Group FWD Button)

Group FWD (External/Internal/
Both)

Used to set the FWD feature for a specified ICD group. The feature
is applied to CO line calls, intercom calls, or both. (

®

 6.1.7  FWD/

DND Button, Group FWD Button)

Account Code Entry (Account)

Used to enter an account code. (

®

 1.1.2  Account Code Entry)

Conference

Used to establish a multiparty conversation. (

®

3.1.16  Conference)

Terminate

Used to disconnect the current call and make another call without
hanging up. (

®

 6.1.2  Flash/Recall/Terminate)

External Feature Access (EFA)

Used to send a flash/recall signal to the telephone company or host
PBX to access external features. (

®

 5.1.1  EFA (External Feature

Access))

Call Park

Used to park or retrieve a call in a preset PBX parking zone. (

®

3.1.5  Call Park)

Document Version  2010-11  

Feature Manual

109

6.1.3 Flexible Buttons

Summary of Contents for KX-TDA50

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands