Panasonic KX-TDA50, Feature Manual

Page: 32 / 384

3.1 C
3.1.1 Caller ID
Description
The PBX can receive Caller ID information (a caller’s name and telephone number) from calls received on CO
lines. This information can be shown on a proprietary telephone (PT) display when receiving a call and can be
used to direct calls from specific callers to specific destinations automatically. Additionally, Caller ID information
is logged in the Incoming Call Log of the extension which received the call, allowing the caller to view a record
of incoming calls or make a call to a person in the call log later.
The PBX can be programmed to modify a caller’s telephone number when it is received and, for example, add
a CO Line Access number or add/delete certain digits of incoming telephone numbers automatically. This
allows an extension user to be able to make a call later to a telephone number logged in his or her call log
without worrying about CO Line Access numbers, area codes, etc.
Note
•
The term "Caller ID" used in this Feature Manual refers to features that can receive caller information
sent from the telephone company and received on analog, ISDN, and T1 lines. Your network provider
may use a different name for this type of service.
•
To receive Caller ID information, you must subscribe to the telephone company’s Caller ID service and
enable Caller ID for the appropriate CO line through system programming.
Caller ID to SLT Port:
Caller ID information can also be shown on a single line telephone (SLT) display. This feature is available only
for SLTs compatible with FSK-type Caller ID.
1.
Caller ID Features
There are three features which can receive Caller ID information. The available feature depends on the
type of CO line receiving the call.
Feature Description Details in
Caller ID Receives caller information sent from the
telephone company over analog CO lines. –
Calling Line Identification
Presentation (CLIP) Receives caller information sent from the
telephone company over ISDN lines. –
Automatic Number
Identification (ANI)
(KX-TDA100/KX-TDA200/
KX-TDA600) Receives caller information sent from the
telephone company over T1 lines.
®
17.1.1 T1
Line Service
2.
Caller ID-Related Features
Feature Description Details in
Calling Line Identification
(CLI) Distribution Caller ID information received by the PBX is used
to direct calls from specific callers to specific
destinations. The caller’s telephone number and a
destination must be assigned in the System Speed
Dialing Table.
®
3.1.12 CLI
(Calling Line
Identification)
Distribution
32 Feature Manual Document Version 2010-11
3.1.1 Caller ID