Panasonic KX-TDA50, Feature Manual

Page: 265 / 384

The leading numbers of extensions accessed through the VoIP network are added as entries to the Quick
Dialing table, in addition to being registered as Other PBX Extension Numbers, as shown below:
[Programming Example]
Number to dial to call an extension at another PBX using VoIP network:
7 (TIE line access number) + 20 (PBX Code) + 1011 (extension number)
Number to dial to call that extension using a public CO line:
9 (CO line access number) + 1-333-123-1011
[Quick Dialing Table]
Quick Dialing No. Destination No.
720 91333123
If the call cannot be completed using the VoIP network, and the dialed leading number is found in the Quick
Dialing Table, the call will be automatically rerouted to a CO line and as specified by the corresponding
destination number.
When a call is made using the VoIP network, if the PBX does not receive a reply from the other PBX within
about 4 seconds of making the call, or an error is returned, the call is rerouted to a public CO line as specified.
Conditions
•
Some QSIG services are available. (
®
13.1.18 PRIVATE NETWORK FEATURES—QSIG)
•
Toll Restriction (TRS) settings apply to calls rerouted to public CO lines.
PC Programming Manual References
3.20 [1-1] Slot—Port Property - IP-GW Port
4.9 [2-6-2] Numbering Plan—Quick Dial—
Use quick dial for rerouting to public CO when TIE line does not
work
11.1 [9-1] TIE Table
Feature Manual References
13.1.13 PRIVATE NETWORK FEATURES
13.1.24 PS (Portable Station)
Description
A Panasonic portable station (PS) can be used in place of a proprietary telephone (PT), providing wireless
access to PBX features and call handling. Cell Stations (CSs) allow PSs to receive reception within a
designated area.
1.
Registration
Before a PS can be used, it must be registered with the PBX through system programming and assigned
an extension number.
3.34 [1-2] Portable Station—PS Registration and De-registration—
Registration
[690] PS Registration
Because a PS transmits radio waves, it is possible that a PS belonging to a neighboring PBX can be
registered to your PBX. To prevent this sort of unauthorized registration, a personal identification number
(PIN) can be programmed for this PBX that must be entered on the PS during registration. This PIN, if
programmed, is only used during the PS registration process.
3.34 [1-2] Portable Station—PS Registration and De-registration—
Personal Identification Number
Document Version 2010-11 Feature Manual 265
13.1.24 PS (Portable Station)