Panasonic KX-TDA50 Page 62 Feature Manual Download

Page: 62 / 384

3.1.18 Confirmation Tone

Description

At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation tone
to extension users.

Type

Description

Tone 1

Sent when the setting is accepted.

Sent when a call is received in voice-calling mode (Alternate Receiving—
Ring/Voice). The caller’s voice will be heard after the tone.

Tone 2

Sent from an external paging device or an extension before being paged.

Sent when a call is received while an extension is in Hands-free
Answerback mode.

Tone 3-1

Sent before a conversation is established using the Paging feature.

Sent to the caller when a conversation is established with an extension in
one of the following modes:

•

Hands-free Answerback mode

•

Voice-calling mode (Alternate Receiving—Ring/Voice)

Sent when making a call to or from a doorphone.

Tone 3-2

Sent before a conversation is established when accessing the following
features by the feature numbers:

•

Call Park Retrieve

•

Call Pickup

•

Hold Retrieve

•

Paging Answer

•

Trunk Answer From Any Station (TAFAS)

Tone 4-1

Sent when a call changes from a two-party call to a three-party call (e.g.,
Executive Busy Override, Conference, Privacy Release, Two-way Record).

Tone 4-2

Sent when a call changes from a three-party call to a two-party call (e.g.,
Executive Busy Override, Conference, Privacy Release, Two-way Record).

Tone 5

Sent when a call is placed on hold (including a consultation hold).

Conditions

•

Confirmation Tone Patterns

All confirmation tone patterns have a default (

21.3 Tones/Ring Tones).

•

It is possible to eliminate each tone.

PC Programming Manual References

4.17 [2-9] System Options—Option 3

→

Confirmation Tone—Tone 1 : Called by Voice

→

Confirmation Tone—Tone 2 : Paged / Automatic Answer

→

Confirmation Tone—Tone 3-1 : Start Talking after Making Call / Call from Doorphone

→

Confirmation Tone—Tone 3-2 : Start Talking after Answering Call

→

Confirmation Tone—Tone 4-1 : Start Conference

→

Confirmation Tone—Tone 4-2 : Finish Conference

Feature Manual

Document Version 2010-11

3.1.18 Confirmation Tone

Summary of Contents for KX-TDA50

































































































































































































































































































































































































Search results

Summary of Contents for KX-TDA50

Reviews:

Related manuals for KX-TDA50

Brands by name

Popular brands

Panasonic KX-TDA50, Feature Manual

Search results

Summary of Contents for KX-TDA50

Reviews:

Related manuals for KX-TDA50

Brands by name

Popular brands