Panasonic KX-TD816AL Installation Manual Download

Page: 18 / 377

System Outline

1-3

1.1

System Highlights

Programming System

The system can be programmed from a digital proprietary
telephone or from a personal computer.

Voice Mail Integration

The system supports Voice Processing Systems with in-band
DTMF signaling.

Automatic Route Selection (ARS)

Automatically selects the pre-programmed least expensive route for
outgoing toll calls.

Trunk (CO Line) Answer From Any Station (TAFAS)

Ringing occurs over the external paging system; call can be
answered from any station.

Remote Station Lock Control

Allows an operator to lock an extension so that outgoing calls
cannot be made.

Charge Fee Reference

Allows the user to see charges and print out the charges.

Budget Management

Limits the telephone usage to a pre-assigned amount.

Hotel Application

Allows to handle the front and operator service such as check-in /
check-out and wake-up call setting.

Summary of Contents for KX-TD816AL


























































































































































































































































































































































































Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands

Panasonic KX-TD816AL, Installation Manual

Search results

Summary of Contents for KX-TD816AL

Reviews:

Related manuals for KX-TD816AL

Brands by name

Popular brands