manualshive.com logo in svg

Panasonic KX-TD816AL, Installation Manual

The Panasonic KX-TD816AL user manual addendum is available for free download on our website. This comprehensive manual provides detailed instructions for using and setting up the KX-TD816AL, allowing users to optimize their experience with this premium Panasonic telephone system. Grab your copy now from manualshive.com.

Share
Download
background image

Installation

2-3

2.1

Before Installation

the wires where they may be stepped on.  Avoid wiring under
carpets.

3. Avoid using the same power supply outlet for computers,

telexes, and other office equipment.  Otherwise, the system
operation may be interrupted by the induction noise from such
equipment.

4. Please use one pair telephone wire for extension connection of

(telephone) equipment such as single line telephones, data
terminals, answering machines, computers, voice processing
systems, etc., except proprietary telephones (KX-T7220, KX-
T7230, KX-T7235, KX-T7250 etc.). 

5. The Power Switch of the system must be off during wiring.

After all the wirings are completed, turn the Power Switch on.

6. Mis-wiring may cause the system to operate improperly.  Refer

to Section 6.1.1 “Installation” and Section 6.1.2 “Connection.” 

7. If an extension does not operate properly, disconnect the

telephone from the extension line and then connect again, or turn
off the Power Switch of the system and then on again.

8. The system is equipped with a 3-wire grounding type plug.  This

is a safety feature.  If you are unable to insert the plug into the
outlet, contact your electrician to replace your obsolete outlet.
Do not defeat the purpose of the grounding-type plug.

9. Use twisted pair cable for CO line connection.

10. CO lines should be installed with lightning protectors.  For

details, refer to Section 2.4.3 “Lightning Protector Installation.”

Warning:

Static sensitive devices are used.
To protect printed circuit boards
from static electricity, do not
touch connectors indicated to the
right.  To discharge body static,
touch ground or wear a
grounding strap.

Warning : Static sensitive connectors

REMOTE

SYSTEM INTER

CONNECTION

8CO/ISDN

Summary of Contents for KX-TD816AL


























































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-TD816AL

Hama Bike Operating Instructions Manual preview
Bike
Brand: Hama Pages: 22
Radio Shack Cordless Telephone Owner'S Manual preview
Cordless Telephone
Brand: Radio Shack Pages: 12
Panasonic EASE-PHONE KX-T4400 Operating Instructions Manual preview
EASE-PHONE KX-T4400
Brand: Panasonic Pages: 78
Sennheiser XS WIRELESS 1 Quick Manual preview
XS WIRELESS 1
Brand: Sennheiser Pages: 2
Lucent Avaya 6402D User Manual preview
Avaya 6402D
Brand: Lucent Pages: 9
Hyundai HDT-H12 User Manual preview
HDT-H12
Brand: Hyundai Pages: 26
switel D7000 Vita Plus User Manual preview
D7000 Vita Plus
Brand: switel Pages: 98
Uniden DECT2188 (French) Manual D'Utilisation preview
DECT2188
Brand: Uniden Pages: 40
Sven SPS-818 Operation Manual preview
SPS-818
Brand: Sven Pages: 12
Rain Bird IQ3G-USA Quick Start Manual preview
IQ3G-USA
Brand: Rain Bird Pages: 1
Steren BOC-2132 Manual preview
BOC-2132
Brand: Steren Pages: 26
Panasonic SA-AK350E Service Manual preview
SA-AK350E
Brand: Panasonic Pages: 100
RCA RS2302 User Manual preview
RS2302
Brand: RCA Pages: 20
RCA RS2130i User Manual preview
RS2130i
Brand: RCA Pages: 27
Geemarc ClearSound CC40 User Manual preview
ClearSound CC40
Brand: Geemarc Pages: 24
Geemarc PhotoDECT User Manual preview
PhotoDECT
Brand: Geemarc Pages: 73
Gigaset A390 Manual preview
A390
Brand: Gigaset Pages: 21
LG FB163-A Manual preview
FB163-A
Brand: LG Pages: 24

Brands by name

Popular brands

Load more brands