manualshive.com logo in svg

Panasonic KX-TD816AL, Installation Manual, Page: 292 / 377

Share
Download
Panasonic KX-TD816AL Installation Manual Download Page 292

4.5

TRS / ARS Programming

ARS Mode

4-74

System Programming

312

Description

Allows you to turn on or off the Automatic Route Selection (ARS)
mode.  ARS, if enabled, selects the least expensive route to be used
for an outside call.

Selection

On / Off

Default

Off

Programming

1.

Enter 312.

Display: ARS Mode

2.

Press NEXT.

Display example: ARS:Off

3.

Press SELECT until the desired selection is displayed.

4.

Press STORE.

5.

Press END.

Conditions

• If “Off” is selected, the Automatic Line Access feature functions in

place of ARS.

• Programs [313] through [331] are used to program ARS.

Feature References

Section 3, Features,
Automatic Route Selection (ARS)
Line Access, Automatic

Summary of Contents for KX-TD816AL


























































































































































































































































































































































































Reviews:

No comments