Panasonic KX-TD1232G User Manual Download Page 74

Page: 74 / 250

3-6

User Programming (Manager Programming)

3.1.2

Programming Ways

Going to another program address

After pressing STORE, you can go to another program with either of the following two
methods:

(1) • To go to the next larger program address:

Press Soft 1 (SKP+) or VOLUME

(DOWN).

• To go to the next smaller program address:

Press SHIFT + Soft 1 (SKP-) or VOLUME

(UP).

(2)

To go to a specific program address:
Press END, then enter the program address.

Going back to the operation mode

Two ways are available to go back to the operation mode:

(1) Lift the handset while in programming mode.
(2) When the Initial Message:

MNG-PRG NO?->

is displayed, press the PROGRAM

button.
(To display the Initial Message, press END.)

Summary of Contents for KX-TD1232G



























































































































































































































































Search results

Summary of Contents for KX-TD1232G

Reviews:

Panasonic KX-TD1232G, User Manual, Page: 74 / 250

Search results

Summary of Contents for KX-TD1232G

Reviews: