Panasonic KX-TD1232G User Manual Download Page 16

Page: 16 / 250

1-10

DPT Overview

1.1

Configuration

Usage

AUTO ANSWER/MUTE Button

Used for extension auto answer; it turns the microphone off during a conversation.

AUTO DIAL/STORE Button

Used for System Speed Dialing and for storing program changes.

CONF (Conference) Button

Used to establish a three-party conference.

FLASH Button

Sends an External Feature Access signal to the central office or to a host PBX to access the
services.

Function (F1 through F10) Button

Used to perform the corresponding displayed function or operation.

FWD/DND (Call Forwarding/Do Not Disturb) Button

Used to program the Call Forwarding feature or set the Do Not Disturb (DND) feature.

HOLD Button

Used to place a call on hold.

INTERCOM Button

Used to make or receive extension calls.

MESSAGE Button

Used to call back the message sender.

MONITOR Button

Used for handsfree dialing operation.

PAUSE Button

Inserts a pause in speed dial numbers or in other numbers.

PROGRAM Button

Used to enter into Station Programming mode and to exit Station Programming mode.

REDIAL Button

Used for Last Number or Automatic Redialing.

Summary of Contents for KX-TD1232G



























































































































































































































































Search results

Summary of Contents for KX-TD1232G

Reviews:

Panasonic KX-TD1232G, User Manual, Page: 16 / 250

Search results

Summary of Contents for KX-TD1232G

Reviews: