Panasonic KX-TD1232G User Manual Download Page 152

Page: 152 / 250

4.2

DPT Features

4-68

DPT Features

Conditions

• An attempt to dial to a CO line from a locked extension receives reorder tone and “Nicht

berechtigt” is shown on the display.

• The extension assigned as an operator can set and cancel this function for another extension

(Remote Station Lock Control).

• “Remote Station Lock Control” overrides this feature. If the operator sets Remote Station

Lock on the extension you have already locked, you cannot unlock it.

Programming References

• System Programming — Installation Manual

[100] Flexible Numbering, Electronic station lockout

Feature References

Remote Station Lock Control (4.3/Operator Service Features)

Emergency Call

Allows you to make an emergency call automatically. There are maximum eight emergency
calls. “117,” “118” and “144” are the default settings and the others can be stored through
System Programming.

Dialing

1. Lift the handset or press the SP-PHONE/MONITOR button.

• You hear a dial tone.

2. Dial the desired emergency number.

• This feature automatically chooses an idle CO line.

Conditions

• The emergency call will override the toll restriction level, the “Electric Station Lockout”

feature, and the account code mode, “Verified — All Calls” or “Verified — Toll Restriction
Override.”

Programming References

• System Programming — Installation Manual

[009] Emergency Dial Number Set

[100] Flexible Numbering, Emergency call 1 through 8

emergency number

Summary of Contents for KX-TD1232G



























































































































































































































































Search results

Summary of Contents for KX-TD1232G

Reviews:

Panasonic KX-TD1232G, User Manual, Page: 152 / 250

Search results

Summary of Contents for KX-TD1232G

Reviews: