Panasonic KX-TD1232G User Manual Download Page 177

Page: 177 / 250

4.2

DPT Features

DPT Features

4-93

• A flexible button on the KX-T7250 (no MESSAGE button provided) can be assigned as the

MESSAGE button.

• If the MESSAGE button is not provided nor assigned, dial tone 4* after going off-hook

informs you of a message waiting.

• If multiple messages are left at your extension, calling back is executed in the receiving

order.

• If you select a specific message to call back, calling back is executed in the cyclic order

starting with the selected one.

• With the KX-T7235, you can set or cancel this feature with the display operation.

Programming References

• Station Programming (Section 2)

Flexible Button Assignment — Message Waiting (MESSAGE) Button

(System Programming — [005] (Installation Manual) can be used for this assignment.)

• System Programming — Installation Manual

[100] Flexible Numbering, Message waiting

[214] Message Waiting Ring Interval Time

[990] System Additional Information, Filed (9)

Feature References

System Feature Access Menu — Massage Waiting (4.4/Special Display Features)

* One of the dial tone. Refer to “Tone List” in the Appendix (Section 8).

Microphone Mute

(for KX-T7230 and KX-T7235 only)

Allows you to turn off the microphone so that you can consult privately with others in the
room.

Setting

While having a conversation in handsfree mode;

1. Press the AUTO ANSWER/MUTE button.

• The AUTO ANSWER/MUTE indicator light flashes red slowly.

Cancelling

When microphone mute is established;

1. Press the AUTO ANSWER/MUTE button.

• The AUTO ANSWER/MUTE indicator light turns off.

Conditions

• This feature is effective for the microphone only; your voice will only be muted during a

handsfree conversation.

Summary of Contents for KX-TD1232G



























































































































































































































































Search results

Summary of Contents for KX-TD1232G

Reviews:

Panasonic KX-TD1232G, User Manual, Page: 177 / 250

Search results

Summary of Contents for KX-TD1232G

Reviews: