Panasonic KX-TD1232G User Manual Download Page 151

Page: 151 / 250

4.2

DPT Features

DPT Features

4-67

Electronic Station Lockout

Allows you to lock your extension so that other users cannot make outgoing CO calls at your
extension.

Locking

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (77).

3. Dial the lock code (000 through 999).

4. Dial the same lock code again.

• You hear a confirmation tone and then a dial tone.

• The display shows:

Lock code

5. Hang up or press the SP-PHONE/MONITOR button.

Unlocking

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (77).

3. Dial the same lock code as you used to lock the extension.

• You hear a confirmation tone and then a dial tone.

• The display shows:

4. Hang up or press the SP-PHONE/MONITOR button.

Locked No.:xxx

Unlocked

lock code

Summary of Contents for KX-TD1232G



























































































































































































































































Search results

Summary of Contents for KX-TD1232G

Reviews:

Panasonic KX-TD1232G, User Manual, Page: 151 / 250

Search results

Summary of Contents for KX-TD1232G

Reviews: