manualshive.com logo in svg

Panasonic KX-TD1232G, User Manual, Page: 124 / 250

Share
Download
Panasonic KX-TD1232G User Manual Download Page 124

C

4.2

DPT Features

4-40

DPT Features

Call Park

Allows you to place a held call into a system parking area. This releases you from the parked
call to perform other operations. The parked call can be retrieved by any extension user. If
your extension is assigned as an operator, you can perform the operation using the display.

While having a conversation;

1. Press the TRANSFER button.

• You hear a confirmation tone and then a dial tone.

2. Dial the feature number (52).

3. Dial a parking zone number (0 through 9).

• You hear a confirmation tone and then a dial tone when the call is

parked.

• The display shows:

Parking zone number (0 through 9)

• If you hear a busy tone, that indicates the specified parking zone

is unavailable. The display shows:

• It is not necessary to redial the feature number to change the

parking zone. Just enter the parking zone number while hearing
busy tone.

Retrieving a parked call

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (52).

3. Dial the parking zone number (0 through 9) at which the call is

parked.

• You hear a confirmation tone (optional) and then you can talk to

the party.

• You hear a reorder tone if there is no held call.

• The display shows:

Call Parked at x

Park at 1 N/A

No Held Call

1

2

5

3

parking zone number

2

1

2

5

3

parking zone number

2

Summary of Contents for KX-TD1232G



























































































































































































































































Reviews:

No comments