Panasonic KX-TD1232G User Manual Download Page 107

Page: 107 / 250

4.2

DPT Features

DPT Features

4-23

3. Dial 4.

4. Dial the extension number to which you wish to forward the call.

• You hear a confirmation tone and then a dial tone.

• The display shows:

Extension number to which the call
is to be forwarded

• The FWD/DND indicator light flashes red slowly.

5. Hang up or press the SP-PHONE/MONITOR button.

Programming References

• System Programming — Installation Manual

[202] Call Forwarding — No Answer Time

Call Forwarding — Busy / No Answer

Your calls are forwarded to another extension if your extension is busy or you do not answer
the call in a pre-determined time.

Display Operation (— for KX-T7235)

Setting

1. Lift the handset or press the SP-PHONE button.

2. Press the FWD/DND button.

3. Press the NEXT (S3) button.

4. Press the FWD-BSY/NA (F1) button.

extension number

S 1

S 2

S 3

FWD-BSY/NA (

ext)

FWD(NA) Extxxxx

Summary of Contents for KX-TD1232G



























































































































































































































































Search results

Summary of Contents for KX-TD1232G

Reviews:

Panasonic KX-TD1232G, User Manual, Page: 107 / 250

Search results

Summary of Contents for KX-TD1232G

Reviews: