Panasonic KX-TD1232G User Manual Download Page 123

Page: 123 / 250

4.2

DPT Features

DPT Features

4-39

Conditions

• The operator can unlock the display of call log for any extension if you forget your lock

code as you used to lock the extension. (Incoming Call Log Lock, Remote)

• While in locking status, you cannot lock the display of your extension with new lock code.

You must unlock your extension before locking with new lock code.

• You cannot enter “

” “#” as a lock code.

• When you unlock the extension using the lock code which is different from previous

entering lock code, you hear a reorder tone. While in locking status, if you press OLD (S1)
or NEW (S2) button, the display shows:

Feature References

Call Log, Incoming

Call Log Lock Control, Incoming (4.3/Operator Service Features)

Restricted

Summary of Contents for KX-TD1232G



























































































































































































































































Search results

Summary of Contents for KX-TD1232G

Reviews:

Panasonic KX-TD1232G, User Manual, Page: 123 / 250

Search results

Summary of Contents for KX-TD1232G

Reviews: