Panasonic KX-TD1232G User Manual Download Page 206

Page: 206 / 250

4.2

DPT Features

4-122

DPT Features

Station Feature Clear

Allows you to reset the following station features to the default settings.

a) Absent Message Capability

b) Automatic Callback Busy (Camp-On)

c) Background Music (BGM)

d) Call Forwarding

e) Call Log, Incoming

f) Call Pickup Deny

g) Call Waiting

h) Calling Line Identification Restriction (CLIR)

i) Connected Line Identification Restriction (COLR)

j) Do Not Disturb (DND)

k) Executive Busy Override Deny

l) External Ringer

m) Log-In

n) Message Waiting – (All messages will be removed)

o) Paging — DENY

p) Paralleled Telephone Connection

q) Pickup Dialing (Hot Line) – (The stored telephone number will be removed)

r) Timed Reminder

Clearing current feature setting

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Dial the feature number (790).

• You hear a confirmation tone and then a dial tone.

• The display shows:

3. Hang up or press the SP-PHONE/MONITOR button.

Ext Data Clear

Summary of Contents for KX-TD1232G



























































































































































































































































Search results

Summary of Contents for KX-TD1232G

Reviews:

Panasonic KX-TD1232G, User Manual, Page: 206 / 250

Search results

Summary of Contents for KX-TD1232G

Reviews: