Panasonic KX-TD1232G User Manual Download Page 112

Page: 112 / 250

4.2

DPT Features

4-28

DPT Features

Standard Operation

Setting

- at the destination extension;

1. Lift the handset or press the SP-PHONE/MONITOR button.

2. Press the FWD/DND button.

• You may dial the feature number (710) instead.

3. Dial 7.

4. Dial your own extension number.

• You hear a confirmation tone and then a dial tone.

• The display shows:

Your extension number

• The FWD/DND indicator light flashes red slowly at your own

extension.

5. Hang up or press the SP-PHONE/MONITOR button.

Conditions

• This feature can be cancelled at your extension or at the destination extension.

Programming References

• System Programming — Installation manual

[991] COS Additional Information

your extension number

FWD(From) Extxxxx

Summary of Contents for KX-TD1232G



























































































































































































































































Search results

Summary of Contents for KX-TD1232G

Reviews:

Panasonic KX-TD1232G, User Manual, Page: 112 / 250

Search results

Summary of Contents for KX-TD1232G

Reviews: