Panasonic KX-TD1232G User Manual Download Page 34

Page: 34 / 250

CO Line Charge Fee Reference

Provides you with the display of each CO line charge (telephone rate).

— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

1. Dial 9.

2. Enter the ID Code (4 digits).

• The display shows:

• To erase an incorrect entry, press the CLR (S2) button.

3. Dial 2.

4. Dial the CO line number (01 through 08) or (01 through 24) or press

the NEXT (S3) button until the CO line number will be designated.

- 01 through 08 : if you are connected to the KX-TD816.

- 01 through 24 : if you are connected to the KX-TD1232.

• The display shows the meter.

<Example> If you assign the CO line number 08.

5. Press the SEL (S1) button.

• The display shows the Charge.

• If you press the NEXT (S3) button, the next CO line number will

be displayed to advance.

6. Press the PREV (

) button or END (

) button.

• PREV (

) — return to step 4.

• END (

) — return to the initial programming mode.

— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

Conditions

• You must assign the ID code through System Programming.

2-10

Station Programming

2.2

Programming

Al08:00005

SEL

Al08:00001.15FR

SEL

ID Code

CO line number

S 1

S 2

S 3

SEL

Charge Meter

Summary of Contents for KX-TD1232G



























































































































































































































































Search results

Summary of Contents for KX-TD1232G

Reviews:

Panasonic KX-TD1232G, User Manual, Page: 34 / 250

Search results

Summary of Contents for KX-TD1232G

Reviews: