Panasonic KX-TD1232G User Manual Download Page 195

Page: 195 / 250

4.2

DPT Features

DPT Features

4-111

Using Paging — External: to a particular external pager

While having a conversation;

1. Press the TRANSFER button.

• You hear a dial tone.

• The other party is placed on hold.

2. Dial the feature number (64).

3. Dial an external pager number (1 – 2) or (1 – 4).

- 1 – 2 : if you are connected to the KX-TD816.

- 1 – 4 : if you are connected to the KX-TD1232.

4. Make the announcement after hearing a confirmation tone (optional).

5. Wait for the other party to answer.

• You hear a confirmation tone (optional).

6. Hang up or press the SP-PHONE button.

• The held party and the paged extension are connected and can

start conversation.

Using Paging — Group: to all extension groups

While having a conversation;

1. Press the TRANSFER button.

• You hear a dial tone.

• The other party is placed on hold.

2. Dial the feature number (63) and 0.

3. Make the announcement after hearing a confirmation tone (optional).

4. Wait for the other party to answer.

• You hear a confirmation tone (optional).

5. Hang up or press the SP-PHONE button.

• The held party and the paged extension are connected and can

start conversation.

external pager number

Summary of Contents for KX-TD1232G



























































































































































































































































Search results

Summary of Contents for KX-TD1232G

Reviews:

Panasonic KX-TD1232G, User Manual, Page: 195 / 250

Search results

Summary of Contents for KX-TD1232G

Reviews: