manualshive.com logo in svg

Panasonic KX-TD1232G, User Manual, Page: 240 / 250

Share
Download
Panasonic KX-TD1232G User Manual Download Page 240

4-156

DPT Features

4.4

Special Display Features (— for KX-T7235)

There are three “Features” displays from the Initial
Display.

a) The first display

— Accessible by pressing the Features (F4) 

button.

The KX-T7235 connected to the KX-TD816

The KX-T7235 connected to the KX-TD1232

b) The second display

— Accessible by pressing the NEXT (S3) button.

c) The third display (operator only)

— Accessible by pressing the NEXT (S3) button.

— To execute the “Call Pack” and the “Night
Service” feature using the display function keys,
refer to this section and for the others (BGM-
External and Class of Service (COS) Switch, refer
to the “Operator Service Features” (Section 4.3).

F2

F1

F3

F4

F5

F7

F6

F8

F9

F10

S2

S3

S1

External Paging      0-4

Group Paging         0-8

Group Pickup

Answer Ext-Page      1-4

Answer GRP-Page

PREV

NEXT

MENU

There are two further displays to operate the “Call
Forwarding” and the “Do Not Disturb (DND)”
features.

a) The first display

— Accessible by pressing the FWD/DND button

after going off-hook.

b) The second display

— Accessible by pressing the NEXT (S3) button.

— To execute the “Call Forwarding” and the “Do
Not disturb (DND)” features, refer to the “DPT
Features” (Section 4.2).

Helpful Information on Display Operation

Press CONT (S1) to adjust the display contrast.

Press RING (S2) to adjust the ringer volume.

Press BGM (S3) to turn on/off the BGM.

Press MENU (S1) to return to the initial display.

Press PREV (S2) to return to the previous list.

Press NEXT (S3) to advance to the next list.

Press ACCNT (S3) to enter an Account code.

F2

F1

F3

F4

F5

F7

F6

F8

F9

F10

S2

S3

S1

PREV

NEXT

MENU

Parallel On/Off      1/0 

Message On           ext 

Message Off          ext

Absent MSG On        1-9

Absent MSG Off 

F2

F1

F3

F4

F5

F7

F6

F8

F9

F10

S2

S3

S1

PREV

NEXT

MENU

Call Park            0-9

Night Auto/On/Off   <0-2

Extrn BGM On/Off 

COS Primary          ext

COS Secondary        ext

F2

F1

F3

F4

F5

F7

F6

F8

F9

F10

S2

S3

S1

PREV

NEXT

MENU

External Paging      0-2

Group Paging         0-8

Gropu Pickup

Answer Ext-Page      1-2 

Answer GRP-Page

F2

F1

F3

F4

F5

F7

F6

F8

F9

F10

S2

S3

S1

PREV

NEXT

MENU

FWD-BSY/NA           ext

FWD-CO Line         dial

FWD-From             ext

FWD-From Cancel      ext

F2

F1

F3

F4

F5

F7

F6

F8

F9

F10

S2

S3

S1

FWD/DND Cancel 

Do Not Disturb       ext

FWD-All Calls        ext

FWD-Busy             ext

FWD-No Answer        ext

Summary of Contents for KX-TD1232G



























































































































































































































































Reviews:

No comments