General Programming
138
Programming Guide
[214]
DISA Prolong Time
Description
Sets the maximum allowable prolonged time for an outside-to-outside line call via the Direct
Inward System Access (DISA) feature. An outside-to-outside line call is initially limited by the
"Outside-to-Outside Line Call Duration Time" (Program [206]). However, the DISA caller can
prolong the call after hearing the warning tones by pressing any key (except the key). This
parameter, the "DISA Prolong Time", sets the duration of these extended periods.
This programming is available for the KX-TD1232 only.
Selection
Time (minutes):
0 through 7
(0=no prolonging)
Default
3 min
Programming
1.
Enter
214.
Display: 214 DISA PROLONG
2.
Press
NEXT.
Display example: Time:3 min
3.
Enter the
time.
To change the current entry, enter the new time.
4.
Press
STORE.
5.
Press
END.
Conditions
•
Do not confuse this parameter with the "Outside-to-Outside Line Call Duration Time"
(Program [206]) parameter.
•
Program [206]
Outside-to-Outside Line Call Duration Time is used to set the duration
time allowed for an outside-to-outside line call.
•
You cannot leave the entry empty.
Features Guide References
Direct Inward System Access (DISA)
Summary of Contents for KX-TD1232
