Panasonic KX-TD1232, Program Manual

Page: 234 / 396

General Programming
234 Programming Guide
[440] Line Hunting Sequence
Description
Assigns the hunting sequence of idle lines, seizing from the smallest to the largest line number
or vice versa in an outside line group, on an outside line group basis.
Selection
• Outside line group (TRG) number:
1 through 8,
( =all outside line groups)
•
Small Large
/
Large Small
Default
All outside line groups – from Large to Small
Programming
1.
Enter 440.
Display: 440 LINE HUNT
2. Press
NEXT.
Display: TRK GRP NO?
3. Enter an
outside line group number.
To enter outside line group number 1, you can also press NEXT.
Display example: TRG1: Large > Small
4. Keep pressing
SELECT
until the desired selection is displayed.
5.
Press STORE.
6.
To program another outside line group, press NEXT or PREV, or SELECT and the desired
outside line group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
The default setting (Large Small) may often cause a busy situation between two PBXs, as
the same line may be seized by both sides simultaneously. In this case, we recommend
changing the setting of either PBX to Small
Large.
Features Guide References
None