Panasonic KX-TD1232, Program Manual

Page: 39 / 396

General Programming
Programming Guide 39
Default
[KX-TD816]
All jacks — CO buttons 1 through 8 = Single-CO 01 through 08; Ring tone type 2
Others = Not stored
[KX-TD1232]
All jacks — CO buttons 1 through 48 = Single-CO 01 through 48; Ring tone type 2
Programming
1. Enter
005.
Display: 005 FLEXIBLE CO
2. Press
NEXT.
Display: Jack NO?
3. Enter a
jack number.
To enter jack number 01, you can also press
NEXT.
Display: PT—PGM Mode
4.
Press the CO button which is changed to another button.
The display shows the contents pre-assigned to the button.
Display example: CO-01
5.
Enter a button code (plus parameter , if required).
To change the parameter, press CLEAR and enter the new parameter.
6.
Press STORE.
7.
To program another CO button of the same jack, repeat steps 4 through 6.
To program another jack, press
SELECT and repeat steps 3 through 6.
8.
Press END.
Canceling
1. Perform the same procedures as steps 1 through 4 above.
2. Enter
2.
3. Press
STORE.
4.
Press END.
Conditions
• A centralized telephone is a telephone connected to jack 01 or a jack programmed as a
manager extension in program [006]
Operator / Manager Extension Assignment.
* Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone
capable Panasonic Voice Processing System (one that supports digital proprietary telephone
integration; e.g., KX-TVS100).