Panasonic KX-TD1232, Program Manual

Page: 78 / 396

General Programming
78 Programming Guide
[113] VM Status DTMF Set
Description
Sets the DTMF (Dual Tone Multi-Frequency) signals transmitted to your Voice Processing
System (VPS) to inform the VPS of the VPS ports states quickly:
The following signals are sent to the VPS with the assigned DTMF signals:
RBT
(ringback tone):
This signal is sent when calling an extension.
BT (busy tone):
This is sent when the called extension is busy.
ROT (reorder tone):
This is sent when the dialed number is invalid.
DND
(DND tone):
This is sent when the other extension has DND assigned.
Answer
:
This is sent when the other extension answers the call.
Disconnect :
This is sent when the other extension hangs up.
Confirm
(confirmation tone) :
This is sent when the feature number for "Message Waiting Lamp" is valid.
FWD VM RBT
(FWD to VM ringback tone) :
Not available (reserved).
FWD VM BT
(FWD to VM busy tone) :
This is sent when the called extension has set Call Forwarding to VPS.
FWD EXT RBT (FWD to extension ringback tone) :
Not available (reserved).
Selection
• RBT / BT / ROT / DND / Answer / Disconnect / Confirm / FWD VM RBT / FWD VM
BT / FWD EXT RBT
• DTMF signal number:
3 digits (max.)
Default
RBT — 1; BT — 2; ROT — 3; DND — 4; Answer — 5; Disconnect — #9; Confirm —9; FWD
VM RBT — 6; FWD VM BT — 7; FWD EXT RBT — 8
Programming
1. Enter
113.
Display: 113 VM DTMF SET
2. Press
NEXT
to program ringback tone status.
To program another status, keep pressing NEXT until the desired status is displayed.