Panasonic KX-TD1232, Program Manual

Page: 366 / 396

General Programming
366 Programming Guide
05 8 Unused
9 Enables or disables dial tone 2 when an
extension sets programmable extension
features such as Call Waiting.
0
: disable
1 : enable
1 None
10 Determines the result when pressing the
FLASH or FLASH / RCL button during
an outside call (When Area 01 - Bit
3=0).
Flash: Disconnects and accesses the
same outside line.
Terminate: Terminates the outside line
and accesses the intercom.
It is convenient to route the
outside call according to
Automatic Route Selection
(ARS) if ARS is active.
0 : Terminate
1
: Flash
1 Flash
11 Selects the message waiting ring type: 3
quick rings or 2 normal rings, for single
line telephones.
0
: 3 times by
40 ms
1 : 2 times by
280 ms
1 Message Waiting
12 Selects the SMDR format for an
incoming call with Caller ID. The
caller's number only or caller's number
only or caller's number and name is
selected.
0
: <Incoming> +
caller no.
1
:<I> + caller no.
+ name
1 Station Message
Detail Recording
(SMDR)
13 Enables or disables the SMDR printout
for RC (when an incoming call occurs)
and AN (when an incoming call is
answered).
0
: enable
1
: disable
1 None
14 Selects the result when a call from DISA
(Direct Inward System Access) is
invalid.
0
: IRNA
1 : reorder tone is
sent
1 None
15 Selects the result of pressing "0"
(default); calls operators 1 and 2 at the
same time or Operator 1 first and then
Operator 2 if Operator 1 is busy.
0
: Operators 1 and
2
simultaneously
1 : Operator 1 first
and then
Operator 2
1 Operator Call
16 Enables or disables the SMDR printout
when the Timed Reminder starts and the
alarm is not answered.
0
: enable
1 : disable
1 Timed Reminder
Explanation
Area Bit Description Selection Default References