General Programming
262
Programming Guide
[508]
Account Code Entry Mode
Description
There are three account code modes: Option, Verified-All Calls and Verified-Toll Restriction
Override. This program determines the mode to be used by each Class of Service (COS).
Option mode:
The user can enter any account code, if needed.
Verified — All Calls mode:
The user must always enter a pre-assigned account code to make an outside call.
Verified — Toll Restriction Override mode:
The user must enter a pre-assigned account code when the user needs to override toll
restriction.
Selection
•
COS number:
1 through 8,
( =all COS)
•
Option / Verify — All
(Verified-All Calls)
/ Verify — Toll
(Verified-Toll Restriction
Override)
Default
All COS — Option
Programming
1.
Enter
508.
Display: 508 ACC CODE OPT
2.
Press
NEXT.
Display: COS NO?
3.
Enter a
COS number.
To enter COS number 1, you can also press
NEXT.
Display example: COS1:Option
4.
Keep pressing
SELECT
until the desired selection is displayed.
5.
Press
STORE.
6.
To program another COS, press
NEXT
or
PREV,
or
SELECT
and the desired
COS
number.
7.
Repeat steps 4 through 6.
8.
Press
END
.
Conditions
•
To assign all COS to one selection, press the key in step 3. In this case, the display shows
the contents programmed for COS 1.
Summary of Contents for KX-TD1232
