Panasonic KX-TD1232, Program Manual

Page: 368 / 396

General Programming
368 Programming Guide
07 1 Enables or disables the DTMF signal to
the ISDN line.
0
: enable
1 : disable
1 Direct Inward
System Access
(DISA)
2-4 Unused
5 Enables or disables the hooking signal
when the reverse signal does not return. 0 : disable
1
: enable
1 None
6 Reserved
7 Allows a beep in Music on Hold. 0 : beep
1
: usual music
source
1 Music on Hold
9, 8 Determines how the call is treated when
a call from DISA arrives at a Do Not
Disturb (DND) extension or busy
extension which has disabled Call
Waiting. 01 : IRNA
(Intercept
Routing - No
Answer)
10 / 11
: receive at
the CO button
(only flashes)
00 : busy tone is
sent
11 Direct Inward
System Access
(DISA)
11, 10 Determines how the call is treated when
a call from DID arrives at a Do Not
Disturb (DND) extension or busy
extension which has disabled Call
Waiting. If "IRNA" whose destination is
DISA is selected, a reorder tone is sent.
01
: IRNA
10 / 11 : receive at
the CO button
(only flashes)
00
: busy tone is
sent
11 Direct Inward
Dialing (DID)
13, 12 Determines how the call is treated when
a call from ISDN line arrives at a Do Not
Disturb (DND) extension or busy
extension which has disabled Call
Waiting.
01
: IRNA
10 / 11
: receive at
the CO button
(only flashes)
00 : busy tone is
sent
11 Integrated
Services Digital
Network (ISDN)
15, 14 Determines how the call is treated when
a call from TIE line arrives at a Do Not
Disturb (DND) extension or busy
extension which has disabled Call
Waiting. If "IRNA" whose destination is
DISA is selected, a reorder tone is sent.
01 : IRNA
10 / 11
: receive at
the CO button
(only flashes)
00 : busy tone is
sent
11 TIE Line Service
16 Enables or disables the SMDR printout
for DID subscriber number. A DID
subscriber number replaces a Caller ID
number.
0
: enable
1
: disable
1 Station message
Detail Recording
(SMDR)
Explanation
Area Bit Description Selection Default References