Panasonic KX-TD1232, Program Manual

Page: 367 / 396

General Programming
Programming Guide 367
06 1 Determines whether the account code is
printed out or not (shown in dot) in the
SMDR.
0
: not printed out
1 : printed out
1 Account Code
Entry
3, 2 Reserved
4 Enables or disables sending outside
(CO) line access code "9" to a TIE line.
When you dial outside line access code
"9" and the outside line is busy, the
system can automatically send outside
line access code "9" to a TIE line so that
you can access the outside line through
another PBX. 0 : enable
1
: disable
1
5 Determines whether to printout the last
entered or the first entered account code
in the SMDR. 0 : first entered
code
1
: last entered
code
1 Account Code
Entry
6 When an incoming call is received in a
Hunting group (Ring, UCD, Circular,
Terminate), this program determines
whether the extension where the Do Not
Disturb feature is set receives the call or
not.
0
: receive
1 : not receive
1 None
7 When an incoming call is received in a
Hunting group (Ring, UCD, Circular,
Terminate), this program determines
whether the extension where the Call
Forwarding feature is set receives the
call or not. 0 : receive
1 : not receive
1 None
8 Enables or disables Circular and
Terminate Hunting. 0 : disable
1
: enable
1 Station Hunting
13-9 Unused
14 Allows or prevents dialing "0" when the
MDN number is "0". 0 : allow
1
: prevent
1 None
16, 15 Unused
Explanation
Area Bit Description Selection Default References