Panasonic KX-TD1232, Program Manual

Page: 172 / 396

General Programming
172 Programming Guide
[402] Dial Mode Selection
Description
Each outside line can be programmed for DTMF (Dual Tone Multi-Frequency), pulse (rotary)
or call blocking. This program assigns your choice to each line.
DTMF:
The dialing signals from an extension, either tone or pulse, are converted to tone signals and
transmitted to the outside line.
Pulse:
The dialing signals from an extension, either tone or pulse, are converted to pulse signals and
transmitted to the outside line.
Call blocking:
If your central office can receive both DTMF and pulse signals but you are contracted for pulse,
select this mode. When dialing on the line with a touch tone telephone, only the pulse signals
are sent to the outside line.
Selection
• Outside line (CO) number:
KX-TD816 —
01 through 08
,
KX-TD1232 —
01 through 24
,
( =all outside lines)
•
DTMF / Pulse / C. Block
(call blocking)
Default
All outside lines — DTMF
Programming
1.
Enter 402 .
Display: 402 DIAL MODE
2. Press
NEXT
.
Display: CO Line NO?
3.
Enter an
outside line number
.
To enter outside line number 01, you can also press
NEXT
.
Display example: CO01:DTMF
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE .
6. To program another outside line, press
NEXT
or
PREV
, or
SELECT
and the desired
outside line number
.
7.
Repeat steps 4 through 6.
8. Press
END
.