Panasonic KX-NS700, Feature Manual

Page: 85 / 580

Note
Pressing this button only allows the forwarding feature to be enabled or disabled. The forwarding
destination should be set at the extension subject to this operation. Also, DND cannot be enabled or
disabled.
[Example]
–
Setting Group FWD from "Secretary"
extension to "Boss" extension
If the "Secretary" (Ext. 102) presses the
assigned
Group FWD button, forwarding
for the "Boss" (Ext. 101) will be turned on
(the LED will turn red).
Secretary
Extn. 102 Boss
Extn. 101
DSS button
(FWD 101)
Forwarding
enabled
–
Cancelling Group FWD from "Secretary"
extension to "Boss" extension
If the "Secretary" (Ext. 102) presses the
assigned
Group FWD button again,
forwarding for the "Boss" (Ext. 101) will be
turned off (the LED will turn off).
Secretary
Extn. 102 Boss
Extn. 101
Forwarding
disabled
DSS button
(FWD 101)
•
Message Waiting
While calls are forwarded, Message Waiting information is not forwarded. The Message button light turns
on at the originally called extension. (
®
2.20.1 Message Waiting)
•
Idle Extension Hunting
Idle Extension Hunting applies to calls forwarded to a busy extension in an idle extension hunting group.
•
Second Line LCD Display Information for ICD Group Redirected Call
If an incoming call distribution receives a redirected call, the second line of the PT receiving the call can
be set to display either of the following information, through system programming.
–
The extension number and name of the extension or ICD Group that originally received the call.
–
The floating extension number and name of the ICD Group currently receiving the call.
[All Calls and Busy]
•
If the forward destination is not available to answer a call, this feature is cancelled and the original
destination will ring for the following type of call:
–
Doorphone call
–
Trunk calls via the LCOT card
[No Answer and Busy/No Answer]
•
No Answer Time
The number of rings before the call is forwarded is programmable for each extension.
[Follow Me]
•
This feature is only available when the original extension has set " Remote Operation by Other
Extension " to " Allow " through COS programming.
[Parallel Ringing When Forwarding to Trunk]
•
KX-NSE101, KX-NSE105, KX-NSE110 or KX-NSE120 (Activation Key for Mobile Extension) is required
to use this feature. One activation key is required for each extension that will use this feature.
Feature Manual 85
2.3.2 Call Forwarding (FWD)