manualshive.com logo in svg

Panasonic KX-NS700, Feature Manual

Share
Download
Panasonic KX-NS700 Feature Manual Download Page 551

5.5  Fault Recovery/Diagnostics

5.5.1  UPS (Uninterruptible Power Supply) Integration

Description

An uninterruptible power supply unit (UPS) is a device that supplies power for several minutes to a connected
device when a power failure occurs.

Conditions

•

For details about UPS units that are compatible with the automatic shutdown feature of this PBX, consult
your dealer. If an incompatible UPS is connected and the UPS runs out of power, the PBX will turn off
without shutting down.

•

When power is restored after a power outage, the PBX operates in the following manner:

–

If the PBX did not shut down, normal operation continues uninterrupted.

–

If the PBX shut down and power remains in the UPS, the PBX must be started again manually. (The
power switch must be turned off and then on again.)

–

If the PBX shut down and no power remains in the UPS, the PBX starts automatically. (This is because
the PBX’s power switch is on.)

Installation Manual References

4.10  Connection of Peripherals

PC Programming Manual References

4.1.1  Status—Equipment Status—UPS

Feature Manual

551

5.5.1 UPS (Uninterruptible Power Supply) Integration

Summary of Contents for KX-NS700





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands