manualshive.com logo in svg

Panasonic KX-NS700, Feature Manual

Share
Download
Panasonic KX-NS700 Feature Manual Download Page 213

[Flowchart]

A DISA call from an outside party is received.

No

Is there a port available?

Yes

The PBX answers the call.

The OGM plays and the PBX starts to 
receive the DTMF signalling.

Yes

The OGM stops.

No

Is a second digit dialled?

Is the first digit dialled?

Yes

Is the first dialled digit assigned a 
destination for the DISA AA service?

The call is routed to the destination.

Yes

The PBX receives the dialled 
digits and checks the dialled 
number.

No

What is the DISA security mode? 

Continued on next page

F

A

The call is routed to an operator,
etc. (DISA Intercept   when All 
DISA Ports are busy)

(DISA Mute & OGM Start Time 
after Answering 

expires

)

(DISA Delayed 
Answer time 

expires

)

(DISA Second Digit Time for 
Automated Attendant 

expires

)

No

What method is assigned for 
DISA Intercept Routing   No Dial?

Operator

Disable

AA-0, AA-9

The call is 
disconnected.

The call is redirected to 
the destination assigned 
to AA-0 or AA-9. 

The call is routed to an 
operator.

(DISA First Digit Time 
When No Dial 

expires

)

C

C

Feature Manual

213

2.16.1 Direct Inward System Access (DISA)

Summary of Contents for KX-NS700





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands