Panasonic KX-NS700 Feature Manual Download

Page: 24 / 580

Destination

Availability

Idle Line Access no. + Phone no.

Trunk Group Access no. + Trunk Group no. + Phone no.

Other PBX Extension (TIE with no PBX Code)

Other PBX Extension (TIE with PBX Code)

Intercept Routing

After setting distribution, it may also be necessary to set the following features.

Feature

Description & Reference

Intercept Routing

No Answer (IRNA)

If a called party does not answer a call within a
preprogrammed time period (Intercept time), it is
redirected to the preprogrammed destination.

2.1.1.6 Intercept Routing

Busy/DND

If a called party is busy or in DND mode, the call is
redirected to the preprogrammed destination.

2.1.1.6 Intercept Routing

No Destination

If a destination is not assigned, the call is redirected to
the operator.

2.1.1.7 Intercept Routing—No Destination

PC Programming Manual References

18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—DIL—

Trunk Property

Feature Manual

2.1.1 Incoming Trunk Call Features

Summary of Contents for KX-NS700





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-NS700

Reviews:

Related manuals for KX-NS700

Brands by name

Popular brands

Panasonic KX-NS700, Feature Manual

Search results

Summary of Contents for KX-NS700

Reviews:

Related manuals for KX-NS700

Brands by name

Popular brands