Panasonic KX-NS700, Feature Manual

Page: 247 / 580

[Other Panasonic SLTs with a Message feature]
•
Programming is not required to use this feature.
•
Message Waiting Lamp is supported by the FSK signal. The SLT cards that support Message Waiting
Lamp (FSK) are as follows:
–
MCSLC4 (installed by default)
–
MCSLC8 (KX-NS5173)
–
MCSLC16 (KX-NS5174)
[SIP Phones]
•
To use this feature, it must be enabled for each extension port through system programming. (
®
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 8— SLT
MW Mode)
•
Only Standard type or Unsolicited type general SIP extensions can control message waiting indication
LEDs. To change the message waiting indication method, refer to 9.16 PBX Configuration—[1-1]
Configuration—Slot—Port Property—V-SIPEXT—
MWI Method.
PC Programming Manual References
9.16 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPEXT
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Message Waiting Set /
Cancel / Call Back
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature—
Message Waiting
Set
10.9 PBX Configuration—[2-9] System—System Options—Option 3—
Dial Tone—Distinctive Dial Tone
10.9 PBX Configuration—[2-9] System—System Options—Option 5— SLT—Message Waiting Lamp Pattern
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 8— SLT MW
Mode
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button—
Type
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button— Type
Feature Manual References
2.21.2 Flexible Buttons
3.2 System and Subscriber Features
6.1 Capacity of System Resources
Operating Manual References
1.2.4 When the Dialled Line is Busy or There is No Answer
1.8 Using the Unified Messaging Features
Feature Manual 247
2.20.1 Message Waiting