manualshive.com logo in svg

Panasonic KX-NS700, Feature Manual

Share
Download
Panasonic KX-NS700 Feature Manual Download Page 296

2.25.2  Confirmation Tone

Description

At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation tone
to extension users.

Type

Description

Tone 1

a.

Sent when the setting is accepted.

b.

Sent when a call is received in voice-calling mode 
(Alternate Receiving—Ring/Voice). The caller’s
voice will be heard after the tone.

Tone 2

a.

Sent from an external paging device or an extension
before being paged.

b.

Sent when a call is received in Hands-free
Answerback mode.

Tone 3-1

a.

Sent before a conversation is established when
using the Paging feature.

b.

Sent when a conversation is established with the
extension in the following modes after the call
making operation:

•

Hands-free Answerback mode

•

Voice-calling mode (Alternate Receiving—Ring/
Voice)

c.

Sent when making a call to or from a doorphone.

Tone 3-2

Sent just before a conversation is established when
accessing the following features by the feature numbers:

•

Call Park Retrieve

•

Call Pickup

•

Hold Retrieve

•

Paging Answer

•

TAFAS

Tone 4-1

Sent when moving from a two-party call to a three-party
call. (e.g., Executive Busy Override, Conference,
Privacy Release, Two-way Record.)

Tone 4-2

Sent when moving from a three-party call to a two-party
call. (e.g., Executive Busy Override, Conference,
Privacy Release, Two-way Record.)

Tone 5

Sent when a call is placed on hold (including
Consultation Hold).

Conditions

•

Confirmation Tone Patterns

All confirmation tone patterns have a default (

®

 6.2.1  Tones/Ring Tones).

•

It is possible to eliminate each tone.

296

Feature Manual

2.25.2 Confirmation Tone

Summary of Contents for KX-NS700





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands