Panasonic KX-NS700, Feature Manual

Page: 432 / 580

[Example]
PBX-1 PBX-2
Extn.1000
Extn.1011
(012-345-1011)
V-IPGW V-IPGW
Dials
"7-20-1011".
Private IP
Network
Telephone Company
(area code: 098) Telephone Company
(area code: 012)
PBX code: 20 PBX code: 30
012-345-1011
The leading numbers of extensions accessed through the VoIP network are added as entries to the Quick
Dialling table, in addition to being registered as Other PBX Extension Numbers, as shown below:
[Programming Example]
Number to dial to call an extension at another PBX using VoIP network:
7 (TIE line access number) + 20 (PBX Code) + 1011 (extension number)
Number to dial to call that extension using a public trunk:
9 (trunk access number) + 012-345-1011
[Quick Dialling Table]
Quick Dialling No. Destination No.
720 9012345
If the call cannot be completed using the VoIP network, and the dialled leading number is found in the Quick
Dialling Table, the call will be automatically rerouted to a trunk as specified by the corresponding destination
number.
When a call is made using the VoIP network, if the PBX does not receive a reply from the other PBX within
about 4 seconds of making the call, or an error is returned, the call is rerouted to a public trunk as specified.
Automatic Rerouting of VoIP Calls to Public Trunks using ARS
When dialling an outside party using ARS, the call can be rerouted to a public trunk if the call cannot be
completed successfully.
(012-345-1011)
PBX-1 PBX-2
Extn.1000
V-IPGW V-IPGW
Dials
"9-012-345-1011"
Private IP
Network
Telephone Company
(area code: 098)
Telephone Company
(area code: 012)
012-345-1011
Explanation:
1.
An extension of PBX-1 dials the Idle Line Access number of PBX-1 "9" and telephone number
"012-345-1011".
2.
PBX-1 modifies and routes the call to PBX-2 through a private IP network according to the ARS
programming of PBX-1.
432 Feature Manual
4.3.2 Voice over Internet Protocol (VoIP) Network