9
1. There are six shelf supports to be fitted. Each support should be located into its
corresponding set of slots as shown. When fitting the supports, the arrow marked on
the shelf support should point towards the front of the oven. Please note the
following part numbers are printed on the back side of the individual supports.
E22926Y5 BP X1
Right back
Attaching Shelf Supports
2. Fully insert the locating pegs into
the front slots as shown. When
fitting the supports, the arrows on
them should point towards the
front of the oven. The arrow
refers to the front of the support.
3. Push the support back as shown
so that the rear pegs locate into
the rear slots.
E22916Y5 BP X1
Right middle
E22906Y5 BP X 2
Left back & middle
E2293Y5BP X 2
Right & left front