- 83 -
Connecting with a HDMI cable
Select the desired method of HDMI output.
≥
[AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[1080p], [1080i] or [576p (480p)] which enables the images to be displayed on your TV.
(Please read the operating instructions for the TV.)
≥
The image quality of [AUTO] differs from that of [1080p], [1080i] and [576p (480p)].
≥
Image will not display on TV for a few seconds in the following cases.
j
When [3D OUTPUT] is switched (
l
67, 86)
j
When switching [3D/2D REC MODE] during the Recording Mode.
j
When [REC FORMAT] is switched to [1080/50p] during the Recording Mode
j
When the play mode selection is set to [3D] during the Playback Mode
j
When the play mode selection is set to [2D] and scene in 1080/50p is switched to scene
other than 1080/50p, or vice versa, during the Playback Mode
j
When the play mode selection is set to [PICTURE] and a 3D still picture is switched to
2D still picture, or vice versa, during the Playback Mode.
Listening in 5.1 channel sound
The audio recorded with the built-in microphone can be played back as 5.1 ch audio by
connecting this unit with a 5.1 ch compatible amplifier or TV using a HDMI cable.
For connecting this unit with an AV amplifier or a TV, refer to operating instructions of the AV
amplifier or the TV.
≥
The audio recorded with [MIC SETUP] set to [2ch] will be in stereo (2 ch).
: [OTHER FUNCTION]
#
[HDMI RESOLUTION]
#
[AUTO]/[1080p]/[1080i]/[576p (480p)]
*
* [576p] is displayed when [24p SELECT] is [OFF] and [480p] when it is [ON].
MENU
