Panasonic HDC-Z10000 Operating Instructions Manual Download Page 117

Page: 117 / 144

- 117 -

Selects the brightness level of the right-leaning zebra patterns on the screen.

Touch [ZEBRA DETECT 2].

≥

Touch [SET].

Touch

to adjust settings.

Touch [ENTER].

≥

Touch [EXIT] to exit the menu screen.

≥

Zebra 2 can be displayed by pressing the ZEBRA button after setting. (

69)

Displaying of the luminance level display marker can be switched.

≥

Marker can be displayed by pressing ZEBRA button when set to [ON]. (

69)

≥

The range of the 3D guide display is switched in accordance with the screen size assumed
for playback. (

34)

You can check if the image is level while recording motion pictures and still pictures. The
function can also be used to estimate the balance of the composition.

≥

The guidelines do not appear on the images actually recorded.

≥

When Focus Assist is set to on, the following occurs.

The guidelines are not displayed. (these are displayed on the TV when this unit is
connected to TV.)

The setting cannot be changed.

Display of the range that can be displayed with the common household TV (safety zone) can
be switched.

≥

The safety zone is not displayed on the images that is actually recorded.

[ZEBRA DETECT 2]

[SET]/[OFF]

[MARKER]

[ON]/[OFF]

[3D GUIDE]

[MODE1]/[MODE2]

[GUIDE LINES]

[OFF]/

[SAFETY ZONE]

[90%]/[OFF]

Summary of Contents for HDC-Z10000

















































































































































Search results

Summary of Contents for HDC-Z10000

Reviews:

Related manuals for HDC-Z10000

Brands by name

Popular brands

Panasonic HDC-Z10000, Operating Instructions Manual

Search results

Summary of Contents for HDC-Z10000

Reviews:

Related manuals for HDC-Z10000

Brands by name

Popular brands