Panasonic HDC-Z10000 Operating Instructions Manual Download Page 94

Page: 94 / 144

- 94 -

Installation

When installing the software, log on to your computer as the Administrator or with a user
name with equivalent authorization. (If you do not have authorization to do this, consult your
manager.)

≥

Before starting the installation, close all applications that are running.

≥

Do not perform any other operations on your PC while the software is being installed.

≥

Explanation of operations and screens is based on Windows 7.

Insert the CD-ROM into the PC.

≥

The following screen is displayed automatically. Click [Run setup.exe]

[Yes].

≥

If Windows 7 is in use or the following screen is not displayed automatically, select [Start]

[Computer] (or double-click on [Computer] on the desktop), and then double-click

[Panasonic].

Click [Yes].

Click [Next].

Read the [End User License Agreement], then place a check beside
[I accept the terms of the license agreement] if you agree to them
and click [Next].

Select the country or region where you live,
then click [Next].

≥

If the country or region cannot be selected, select [PAL
Area].

≥

When the confirmation message appears, click [Yes].

Select where the application is to be
installed, then click [Next].

Select [Yes] or [No] to create shortcut.

≥

A message regarding the playback in the environment used
may be displayed depending on the performance of the PC
used. Click [OK] after confirming.

Summary of Contents for HDC-Z10000

















































































































































Search results

Summary of Contents for HDC-Z10000

Reviews:

Related manuals for HDC-Z10000

Brands by name

Popular brands

Panasonic HDC-Z10000, Operating Instructions Manual

Search results

Summary of Contents for HDC-Z10000

Reviews:

Related manuals for HDC-Z10000

Brands by name

Popular brands