Panasonic HDC-Z10000 Operating Instructions Manual Download Page 11

Page: 11 / 144

- 11 -

Charging the battery

Important:

≥

Do not use the AC cable with any other equipment as it is designed only for this unit.
Also, do not use the AC cable from other equipment with this unit.

≥

It is recommended to charge the battery in a temperature between 10

C and 30

(The battery temperature should also be the same.)

≥

Insert the plugs as far as they will go.

Connect the AC cable to the battery charger and the AC outlet.

Insert the battery into the battery charger by aligning the arrows.

≥

We recommend using Panasonic batteries (

13).

≥

If you use other batteries, we cannot guarantee the quality of this product.

≥

Do not heat or expose to flame.

≥

Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period
of time with doors and windows closed.

When this unit is purchased, the battery is not charged. Charge the battery fully
before using this unit for the first time.

Charging lamp [CHARGE]

Lights up:

Charging (Battery charging time:

13)

Goes off:

Charging completed

Flashing:

Be sure to connect the unit correctly
(

136)

Power lamp

≥

This will light up when the AC cable is
connected.

Summary of Contents for HDC-Z10000

















































































































































Search results

Summary of Contents for HDC-Z10000

Reviews:

Related manuals for HDC-Z10000

Brands by name

Popular brands

Panasonic HDC-Z10000, Operating Instructions Manual

Search results

Summary of Contents for HDC-Z10000

Reviews:

Related manuals for HDC-Z10000

Brands by name

Popular brands