Panasonic HDC-Z10000 Operating Instructions Manual Download Page 106

Page: 106 / 144

- 106 -

Adjustment of black level based on the image is performed.

Touch [MASTER PED].

Touch

to adjust the black level.

Touch [EXIT] to exit the menu screen.

Adjusting brightness during the Auto Iris Mode. (

47)

Selects the DRS (Dynamic Range Stretcher) function.
It is possible to expand the dynamic range by compressing the video signal level of the highly
illuminated area that gets washed out with standard recording.

Touch [DRS].

Touch the desired setting item.

≥

Higher the value, greater the compression level of the highly illuminated area.

≥

Higher the value, greater the noise of the dark area.

Touch [EXIT] to exit the menu screen.

≥

If there are extremely dark or bright parts or the brightness is insufficient, the effect may not
be clear.

[MASTER PED]

[AUTO IRIS LEVEL]

[DRS]

[OFF]/[1]/[2]/[3]

Summary of Contents for HDC-Z10000

















































































































































Search results

Summary of Contents for HDC-Z10000

Reviews:

Related manuals for HDC-Z10000

Brands by name

Popular brands

Panasonic HDC-Z10000, Operating Instructions Manual

Search results

Summary of Contents for HDC-Z10000

Reviews:

Related manuals for HDC-Z10000

Brands by name

Popular brands