- 110 -
≥
Recordable time using the battery (
l
13)
≥
This function’s default setting is [1080/50i] (3D Recording Mode)/[HA] (2D Recording
Mode).
≥
Please refer to page 141 about approximate recordable time.
≥
When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded
(particularly when recording in [HE] mode), mosaic-type noise may appear at playback.
It is possible to change the 1080/24p Mode.
≥
This unit will restart when [ON] is touched.
≥
It is not possible to use 1080/24p and other Recording Formats on the same SD card.
When switching to 1080/24p, please use a separate SD card.
≥
The scenes recorded in 1080/24p cannot be played back by the PAL system equipment.
You can set the relay recording and backup recording.
≥
Insert SD cards to card slot 1 and card slot 2.
∫
Relay recording
It is possible to continuously record on the SD card in the other card slot even when the
available capacity of the SD card runs out during the recording.
≥
is displayed on the media to record the video.
will disappear when the recording
media is switched and the relay recording is started.
≥
Relay recording can only be performed once.
∫
Backup recording
Same motion picture can be recorded on two SD cards.
≥
is displayed on the cards the motion pictures is recorded.
≥
When [SD CARD 1] is selected as the destination of recording the motion pictures, backup
will be recorded on [SD CARD 2].
≥
It is recommended to record on the SD cards that are same speed class and same
capacity when performing the backup recording.
(Relay recording)
≥
Destination to record still pictures will be switched to other SD card after performing the
relay recording.
(Backup recording)
≥
Backup recording will not be performed for still pictures.
[24p SELECT]
[ON]/[OFF]
[RELAY/BACKUP]
[OFF]:
Cancell the setting.
[RELAY]:
Set the relay recording
[BACKUP]:
Set the backup recording
