- 104 -
Refer to page 23 for how to set up the Menu.
Camera Setup
≥
Switch to manual mode. (
l
39)
Preferred camera setting information can be saved to each scene file. Switch the scene file in
accordance with the recording conditions.
1
Touch [CUSTOMISE SCENE].
2
Touch the scene file.
≥
The scene file will switch by touching [SCENE1] to [SCENE6].
≥
Touch [EXIT] to exit the menu screen.
3
(To change the setting of the scene file)
Change the setting of the camera setting menu.
≥
Following settings for camera setting menu can be stored. (
l
105 to 108)
j
[DETAIL LEVEL]
j
[V DETAIL LEVEL]
j
[DETAIL CORING]
j
[CHROMA LEVEL]
j
[CHROMA PHASE]
j
[
COLOUR TEMP A ch
]
j
[
COLOUR TEMP B ch
]
j
[MASTER PED]
j
[AUTO IRIS LEVEL]
j
[DRS]
j
[GAMMA]
j
[KNEE]
j
[MATRIX]
j
[SKIN TONE DTL]
≥
Changed settings of the camera setting menu are saved in the scene file.
Default setting of the scene file
≥
This function’s default setting is [SCENE1].
≥
It is possible to switch the scene file by touching
to
while displaying the operation
icons. (
l
71)
≥
It will return to the default settings when [SCENE] is selected in [INITIAL SET]. (
l
124)
Menu
Using the Menu
: [CAMERA SETUP]
#
desired setting
[
CUSTOMISE SCENE]
[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]/[SCENE6]
MENU
[SCENE1]
Setting appropriate for standard recording
[SCENE2]
Setting appropriate for recording considering the characteristic of fluorescent
lamps (indoors, etc.)
[SCENE3]
Setting appropriate for recording with modulation in resolution,
colour
shade,
and contrast
[SCENE4]
Setting appropriate for recording with wider gradation in dark area (dusk, etc.)
[SCENE5]
Setting appropriate for recording as a cinema with high contrast
[SCENE6]
Setting appropriate for recording as a cinema with high dynamic range
SCN1
SCN6
