Panasonic FP Web-Server Hardware And Configuration Manual Download Page 63

Page: 63 / 195

Data logger setup

FP Web-Server V2.810 EN

NOTICE

To prevent data from being inadvertently lost or deleted from the SD

memory card, take appropriate precautionary measures.



If you do not want data to be overwritten in the RAM logging area

when the SD memory card is full, set up a device to send a notification

when the SD memory card has little space left.



Eject the SD memory card only when no data is being written to it,

e.g. by setting a register for "Stop writing".



In case of a power failure, stop logging data and creating logging files

in time by using an appropriate device.

Specifications on the logging area and log files.

Item

Description

Number of log files

1 to 16

Number of data points (devices)
per file

50 (version V2.6 and lower)
Up to 700 (V2.7 and newer)

Total number of devices that can
be stored in all 16 log files

Max. 160 data points (version V2.6 and
lower)
Max. 700 data points (V2.7 and newer)

Number of records per device that
can be stored in the RAM (cache)

100 (version V2.6 and lower)
20 (V2.7 and newer)

Summary of Contents for FP Web-Server




































































































































































































Search results

Summary of Contents for FP Web-Server

Reviews:

Related manuals for FP Web-Server

Brands by name

Popular brands

Panasonic FP Web-Server, Hardware And Configuration Manual

Search results

Summary of Contents for FP Web-Server

Reviews:

Related manuals for FP Web-Server

Brands by name

Popular brands