Panasonic FP Web-Server Hardware And Configuration Manual Download Page 28

Page: 28 / 195

Hardware description

FP Web-Server V2.810 EN

An FP Web-Server with an attached FP0 flat type mounting plate can also

be installed sideways on a DIN rail.

2.1.9 Connecting the power supply

The FP Web-Server unit will turn ON as soon as the power supply has been

connected.



When connecting the power supply (class 2 circuit) make sure
the polarity (+/-) is correct.



The FP Web-Server unit and the PLC have to be supplied by THE
SAME power supply unit.



If power is supplied, the green POWER LED will be ON.



Framing Ground (FG) must be connected.



Please read the Important Notes (see p. 21).



Please also read the "FP Web-Server Leaflet" supplied with your
FP Web-Server.

N o t e

Summary of Contents for FP Web-Server




































































































































































































Search results

Summary of Contents for FP Web-Server

Reviews:

Related manuals for FP Web-Server

Brands by name

Popular brands

Panasonic FP Web-Server, Hardware And Configuration Manual

Search results

Summary of Contents for FP Web-Server

Reviews:

Related manuals for FP Web-Server

Brands by name

Popular brands