Panasonic FP Web-Server Hardware And Configuration Manual Download Page 79

Page: 79 / 195

HTTP client

FP Web-Server V2.810 EN

Emoncms is an open-source (free of charge) cloud server. You can also

download the software to set up your own server for inserting and logging

data. The server offers many different trends to log and visualize inserted

data (e.g. realtime, bar graph, multigraph, comparison and many more).

You can also draw your own dashboards with an integrated drawing editor.

Visit the homepage of Emoncms for more information.

11.3 HTTP client setup

In this section, the input fields of the "HTTP client" tab are described.

For context-sensitive help, highlight the button or entry field (using

<Tab>) and press <F1>.

For further information please refer to the online help under the keywords

"HTTP client setup".

11.3.1 Use Dynamic Server IP/Name

Use this option to set the server name or IP address from the PLC. If this

check box is enabled and no server name is set in the PLC, the FP

Web-Server2 will use the server name or IP address of the configurator.

Summary of Contents for FP Web-Server




































































































































































































Search results

Summary of Contents for FP Web-Server

Reviews:

Related manuals for FP Web-Server

Brands by name

Popular brands

Panasonic FP Web-Server, Hardware And Configuration Manual

Search results

Summary of Contents for FP Web-Server

Reviews:

Related manuals for FP Web-Server

Brands by name

Popular brands